[CA11] Updating EV-1, ACU-200, P70 Software

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Updating EV-1, ACU-200, P70 Software

11-27-19, 07:13 AM (This post was last modified: 11-27-19 08:55 AM by Chuck - Raymarine - Moderator.)

Post: #1

Denis+Ellis Offline

Junior Member

Posts: 14
Joined: Nov 2019
Reputation: 0

[CA11] Updating EV-1, ACU-200, P70 Software

I'm trying to update my autopilot equipment software versions that seem to be on the original revs; is it possible to do so with the P70 off the network (for repair)? I'm using an A70 as the MFD and a correctly formatted/sized CF drive for the upgrades.

I can see the pkg options on the MFD but when I try to start the upgrade process it doesn't proceed. Also I'm surprised to see that Seatalk NG is not an option for transporting the updates to the other pieces even though that is the actual network being used. NMEA and Seatalk 2 are the options shown on the MFD; nothing happens when I try the NMEA option and selecting the Seatalk 2 option does try to do something but it times out. See the attached screenshot.

Should the light be on the EV-1 when powered or does it rely on the P70 to get powered up correctly? At present it does not show any light.

Attached File(s) Thumbnail(s)