Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Updating ST6000 Autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Updating ST6000 Autopilot
12-02-19, 03:52 PM (This post was last modified: 12-02-19 03:53 PM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Updating ST6000 Autopilot
FARALLON,

To you as well. As a test, it is recommended that the ST6000 autopilot control head once again be interfaced to the autopilot course computer. After verifying that is working properly with the autopilot course computer, then remove the A06047 SeaTalkng To SeaTalk Adapter Cable from the D244 SeaTalk Junction Block and instead connect it to the ST6000 autopilot control head's second SeaTalk socket. Does the autopilot control head continue to report no pilot? If so, please specify which the version number of the software installed within the autopilot's control head.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Updating ST6000 Autopilot - Chuck - Raymarine - Moderator - 12-02-19 03:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication