[CA] [CA11] fsh to something

[Chuck - Raymarine - Moderator]

Chris,

Unlike Raymarine's MFDs running the latest LigthHouse 3 or LightHouse II, E-Series Classic MFDs did not have a single command option which would initiate saving all waypoints, routes, and tracks. Accordingly, the operator had to command the E-Series Classic MFD to save all waypoints, then to save all routes, and finally to save all tracks. Executing one or all three of these commands will produce a single Archive.fsh file. The Archive.fsh file produced by the E-Series Classic MFD will not support saving more waypoints, routes, or tracks than are supported by the MFD's internal memory. Accordingly, should on have been interested in saving tracks each year, it would typically have been recommended that the operator command the MFD to save the tracks and that the Archive.fsh file be saved on a computer under a name which is descriptive of its contents (ex. 2016Tracks.fsh, 2017WptRteTrk.fsh etc.). Should the file later be needed to retrieve data from one of these saved files, then it would need to be renamed to Archive.fsh prior to copying it to a CF memory card for use with the E-Series Classic MFD.