The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / NAVAIDS v / connection RS130 GPS to C70 Classic system

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
connection RS130 GPS to C70 Classic system
06-16-16, 02:17 PM
Post: #1
sailndoug Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2016
Reputation: 0
connection RS130 GPS to C70 Classic system
Need some guidance... I had a problem with my old RS125 GPS antenna that fed my C70 Classic, no position fix on the C70. All other components worked fine ie., the C70, ST60 speed and depth and the lights on the RS125 flickered without any consistent pattern. I am trying to connect the new RS130 but of course it has the SeatalkNG connection whereas the C70 has the old Seatalk 3 pin connections. I also have a newer XP30 autopilot controller the is interfaced with the Seatalk system to which I connected the new RS130 antenna. I have a great green blinking light on the RS 130 but still no fix on the chartplotter. Any ideas?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
connection RS130 GPS to C70 Classic system - sailndoug - 06-16-16 02:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication