[CA] [CA11] No GPS signal from AIS 700 and Vhf 55E

[Chuck - Raymarine - Moderator]

Angelo,

Q1. I think I should do this:
Mount an E70196,
To a blue end connect the esisting backbone , to the other blue end connect another small backbone .
To the yellow end connect the supplid st1 wire for nmea183 gps input to vhf Ray 55E (red to gray and yellow to purple.)
Put two white plug on the two white end.
A1. Correct.

Q2. The Gps input go to VHF from internal Axiom Gps. The signal is converted from nmea 2000 to nmea 185 by the converter.
A2. Correct