The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom12 not reading CMap 4D

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom12 not reading CMap 4D
12-16-19, 02:35 PM (This post was last modified: 12-17-19 03:51 PM by Chuck - Raymarine - Moderator.)
Post: #1
paterbil Offline
Junior Member
**
 		Posts: 2
Joined: Nov 2019
Reputation: 0
[CA11] Axiom12 not reading CMap 4D
I am running a new to me Axiom 12 RV (sw version 3.8.105). The previous owner used a Navionics card which had expired.

I updated my own CMap card to a 4D, and put the SD into the Unit. I selected the card, and it does not bring up the chart as I would expect.

The folder structure of the card has a Chart folder, and I am wondering if the contents should be out of that folder? It is the .LIC and .MRC files.

Am I missing something simple?

The boat has 35 hours total, I think I would be well served by doing a factory reset. Is there any data, or info I would want to save from the prior installation?

Thanks for any assistance offered.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom12 not reading CMap 4D - paterbil - 12-16-19 02:35 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication