Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Axiom Pro RVX - High / Low chirp Transducers??

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro RVX - High / Low chirp Transducers??
12-17-19, 11:30 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro RVX - High / Low chirp Transducers??
DFMott,

Q1. I am looking for the best performance and why I thought a pair of B175's would be an improvement in range and clarity over a single B164 on a CP370.
A1. I would concur with this assessment, particularly when considering the depths to be fished. However, for the depth range specified, it would be recommended that a B175M and a B175L be installed.

Q2. Would you then recommend I purchase an Axiom Pro S with a CP470 over a Axiom Pro RVX for my situation?
A2. I favor this solution. Should there be any possibility that you may want to experiment with RealVision, SideVision, or DownVision sonar imaging in the future via a transom mounted transducer and operation as slow trolling speeds, then you may want to alternatively consider an RVX1000 fishfinder sounder module and an Axiom Pro S MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro RVX - High / Low chirp Transducers?? - Chuck - Raymarine - Moderator - 12-17-19 11:30 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication