[CA] [CA11] Axiom12 not reading CMap 4D

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum paterbil,

Please note that the MFD's software is significantly out of date and it is recommended that it be updated with latest available Raymarine product software update (v3.11.42 at the time of this response) and the a Power On Factory Reset be performed following the software update. After doing so, the C-Map chart card should be re-inserted into the MFD's memory card reader and the MFD's Chart application page should then be opened. After doing so, Cartography tab of the Chart Settings dialog should be displayed. Alongside the C-Map option listed, you should find detailed information concerning the cartography stored on the C-Map chart card and the expiration date of the C-Map subscription. Should this information not be observed, then the update performed to the C-Map chart card was flawed. It would be recommend that the C-Map chart card's contents be updated once more and then tested with the MFD. Should the problem persist, then it would be recommended that [url= http://lightmarine.c-map.com/]C-Map Recreational Marine (800.424.2627)[/url] be contacted for further guidance and to possibly have them test your C-Map chart card. Should the detailed information described above be seen, then the C-Map chart listed should be selected from within the Cartography tab of Chart Settings dialog.