[CA] [CA11] E120 to Axiom 12 Does this look ok

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Chris,

Q1. 1. Could you please confirm if it is OK.
A1. Your diagram looks great ... I haven't seen many opt to install a SeaTalkng Inline Terminator (usually a T-Piece or 5-Way will be used to create a spur socket), but it is completely acceptable. For the benefit of others who may be viewing this thread, please click here to view a FAQ addressing replacing an E-Series Classic MFD(s) with an Axiom MFD(s).

Q2. Also with the two Seatalk runs both connected to the Autopilot computer will the autopilot information get transferred to Autopilot computer.
A2. I assume that you mean navigational data from the MFD to support use of the autopilot's Track mode ... and the answer would be yes.

Q3. Any other comments or suggestions would be applreciated.
A3. Depending upon how Actisense or Gemeco package the NGW-1, it may be supplied with a DeviceNet (F) to SeaTalkng Spur Adapter. If not, then one will be required to interface the NGW-1 to the backbone's SeaTalkng spur socket. You have already noted that one of these will be required to interface the MFD to a spur socket within the backbone.