[CA11] E120 to Axiom 12 Does this look ok

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] E120 to Axiom 12 Does this look ok

12-19-19, 11:08 AM (This post was last modified: 12-19-19 11:12 AM by Chuck - Raymarine - Moderator.)

Post: #5

chrisboat Offline

Junior Member

Posts: 18
Joined: Dec 2019
Reputation: 0

RE: [CA11] E120 to Axiom 12 Does this look ok

I had selected the Q24D without cables as was planning to use my old cable for
power. I think there is no power cable at all. I really just need the connector to connect to the power inlet on the Q24D. It looks that adapter cable has that. It is less cost than the lowest cost power cable.

sel

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] E120 to Axiom 12 Does this look ok - chrisboat - 12-17-19, 02:00 PM

RE: [CA11] E120 to Axiom 12 Does this look ok - Chuck - Raymarine - Moderator - 12-18-19, 01:34 PM

RE: [CA11] E120 to Axiom 12 Does this look ok - chrisboat - 12-18-19, 03:30 PM

RE: [CA11] E120 to Axiom 12 Does this look ok - Chuck - Raymarine - Moderator - 12-19-19, 10:00 AM

RE: [CA11] E120 to Axiom 12 Does this look ok - chrisboat - 12-19-19 11:08 AM

RE: [CA11] E120 to Axiom 12 Does this look ok - chrisboat - 01-18-20, 11:10 AM

RE: [CA11] E120 to Axiom 12 Does this look ok - Chuck - Raymarine - Moderator - 01-21-20, 02:01 PM

RE: [CA11] E120 to Axiom 12 Does this look ok - chrisboat - 01-21-20, 05:15 PM

RE: [CA11] E120 to Axiom 12 Does this look ok - Chuck - Raymarine - Moderator - 01-22-20, 08:09 AM

User(s) browsing this thread: 2 Guest(s)