The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer?
12-19-19, 01:03 PM (This post was last modified: 12-20-19 03:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
SloMotion Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2019
Reputation: 0
[CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer?
Hi!

I'm wanting to replace a C97 MFD that is connected to a 7-pin transducer cable with an AXIOM 9 RV. Sometime in the future I will install an RV transducer but for now I need an adapter to convert from the 25-pin AXIOM to the existing 7-pin plug coming from the existing DV transducer.

My problem is that I cannot figure out from the product descriptions whether my existing DV transducer terminates at a "7-pin embedded" connector (adapter #a80488) or the "7-pin CP370" connector (adapter #a80489).

Which adapter do I need?

Help
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer? - SloMotion - 12-19-19 01:03 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication