[CA] [CA11] Side scan issue

[Chief]

Chuck,
15-20ft is closer but yes, not very deep. Bridge image attached.
The video was passing through the section to the right of the drawbridge.

Below is a link to a screen capture in 25-30’ of water.
no 3D in operation and the bottom returns seem to disappear at 75-90’.
I would expect returns significantly further out than that based on other images I have seen.
I always use sidescan in manual range because the default in auto is usually less than 40’.

https://click.email.vimeo.com/?qs=157dfa...5338668bbf

This is another capture.
Again, no 3D is active but the bottom return drops out much closer than I would expect.

https://click.email.vimeo.com/?qs=dae14f...7f04bceab5

I appreciate the feedback.

John