[DG] [DG11] Heading sensor for radar overlay

[Louise - Raymarine - Moderator]

Dear Lshulan,

Thank you for your post.

For radar overlay the smart heading sensor would need to be 10hertz. If it is a NMEA2000 heading sensor, this would connect to the backbone on a spur cable. Always follow the manufacturers instructions for installation.

If you only have 1 heading sensor in the system the Axiom will default to this. If you have multiple heading sensors you can select your desired heading sensor in the master data source menu. If there is an EV1 in the system the Axiom will always prioritise this as the chosen heading source.

HOMESCREEN> SETTINGS> NETWORK> DATA SOURCES> HEADING - a search will be conducted for all heading sensors and you can select the desired on here.

Many Thanks
Louise