[CA11] Interfacing ST5000+ to MFD c120

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Interfacing ST5000+ to MFD c120

12-28-19, 09:30 AM (This post was last modified: 12-30-19 03:56 PM by Chuck - Raymarine - Moderator.)

Post: #1

Mason 33 iguana Offline

Junior Member

Posts: 4
Joined: Nov 2019
Reputation: 0

[CA11] Interfacing ST5000+ to MFD c120

Hello!

I tried to connect the control head with a seatalk cable; the only thing that happen is that the autopilot was then power supplied by the seatalk cable. As I already have a separate power supply, I cut the red cable and only keep the bare and the yellow cable. It did not work.

Q1: Do i have a way to interface them to use the track option and stuff like that?

Q2: Do i most use nmea plug on the c120 to do so?

thanks in advance!

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Interfacing ST5000+ to MFD c120 - Mason 33 iguana - 12-28-19 09:30 AM

RE: [CA11] Interfacing ST5000+ to MFD c120 - Chuck - Raymarine - Moderator - 12-30-19, 04:30 PM

User(s) browsing this thread: 1 Guest(s)