The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS 650 seems to randomly transmiit position
12-29-19, 09:09 AM (This post was last modified: 12-30-19 01:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] AIS 650 seems to randomly transmiit position
I have an odd issue with my Raymarine AIS 650. I was sailing down island with some friends and they reported that we would show up on AIS but disappear for long periods of time. Sometimes days. The light on the AIS box is green. I hooked up AISPro2 and see the following messages:

TX attempt failed (msg 18 TX Disabled)
TX attempt failed (msg 18 CP busy)
TX attempt failed (msg 18 CP busy (marked unavailable))
DSC Stop

I understand the CP busy messages AIS functions like a CDMA network connection. I don't understand the Disabled message. On my E120w chart plotter AIS shows with a green sideways triangle and an X. I see other boats under this scenario. Occasionally the x goes away and I am seen. It's rare that I see transmission.

Any ideas?

Thanks,

Jon
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS 650 seems to randomly transmiit position - Ggt - 12-29-19 09:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)