Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Lighthouse II to Lighthouse 3 upgrade - iso not recognised

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Lighthouse II to Lighthouse 3 upgrade - iso not recognised
12-30-19, 02:05 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Lighthouse II to Lighthouse 3 upgrade - iso not recognised
Welcome to the Raymarine Forum Maherdr,

Verify that the capacity of the microSD card being used does not exceed 32GB and that the microSD card has been formatted with a NTFS file system. Insert them microSD memory card into the MFD's memory card reader (recommend upper slot) and then switch the MFD ON. Should the MFD not automatically perform the update prior to booting up, the command the MFD to check the card for updates. Please be aware that the MFD may report that you will be reinstalling the software ... you should elect to proceed. Should that fail, then try using the microSD memory card which you had used to successfully install the cartography update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Lighthouse II to Lighthouse 3 upgrade - iso not recognised - Chuck - Raymarine - Moderator - 12-30-19 02:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication