Threaded Mode | Linear Mode

***Tom - Raymarine - Moderator***

Hello L-U,

It sounds to me as if you have a stale manual data-source selection (the older instruments manually selected). If you go to Home > Settings > Network > Data Sources on your Master Axiom (if you don't see Data Sources, the other Axiom must be the Master so try there instead) and set the Depth data source back to Auto. If need be, toggle Auto > Manual > Auto again in order to make sure that everything in the system is using the same automatic selection. I'm confident this will solve the problem.

Data Source selection can be useful for solving certain specific problems (e.g. more than one GPS in the system and the wrong one being used), but generally speaking you don't need to do source selection and the default Auto works best.

Regards,
Tom