Raymarine forum / Raymarine Forums / Multifunction Displays v / RL70C not communicating with RC631

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL70C not communicating with RC631
06-17-16, 01:44 PM
Post: #25
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: RL70C not communicating with RC631
dkritter,

Q. So the course computer would only have the ST6001 (all three ST1 wires) attached to it along with it's power for the motors and be able to be operated as a stand alone. Does that make sense?

A. If desiring to power the ST6001 from the autopilot course computer, then all three leads of the SeaTalk cable connecting the ST6001 to the autopilot course computer would need to be connected.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RL70C not communicating with RC631 - Chuck - Raymarine - Moderator - 06-17-16 01:44 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication