[CA11] Feedback request on proposed SeaTalkNg on Regal 3560

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Feedback request on proposed SeaTalkNg on Regal 3560

01-05-20, 05:58 PM (This post was last modified: 01-05-20 09:10 PM by Chuck - Raymarine - Moderator.)

Post: #4

jstadick Offline

Sandlapper

Posts: 5
Joined: Dec 2019
Reputation: 0

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560

Chuck, so after doing part of the install this weekend, I realized I neglected to account for the GPS signal to my Ray215 VHF radio (was coming from old raystar connected to C80 NMEA port). If I'm reading relevant FAQ correctly, If I just introduce the SeaTalkNG to NMEA 0183 converter (E70196) and connect to VHF NEMA input wires as shown in attached updated diagram, that should do the trick? I'm assuming there is no way to daisy-chain from the ST60 (which is already connected to the existing SeaTalk 1 converter) to the VHF?

Thanks again,

John

Attached File(s)
.pdf

SeaTalkNg_Regal_3560_v2.pdf (Size: 808.32 KB / Downloads: 313)

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - jstadick - 12-19-19, 01:02 PM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - Chuck - Raymarine - Moderator - 12-20-19, 11:15 AM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - jstadick - 12-20-19, 12:56 PM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - Chuck - Raymarine - Moderator - 01-06-20, 08:57 AM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - jstadick - 01-06-20, 10:02 AM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - jstadick - 02-06-20, 06:50 PM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - Chuck - Raymarine - Moderator - 01-06-20, 10:38 AM

RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - Chuck - Raymarine - Moderator - 02-06-20, 08:18 PM

User(s) browsing this thread: 4 Guest(s)