The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Autopilot Too Fast

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autopilot Too Fast
01-07-20, 08:37 PM (This post was last modified: 01-08-20 04:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
flippercarson Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2018
Reputation: 0
[CA11] Autopilot Too Fast
Hello,

We have replaced all of our old Simrad electronics on board our Hallberg-Rassy 53 sailing boat with new Raymarine.

We have a Raymarine EV-1 autopilot and ACU400 power pack driving a type 3 hydraulic pump over a pair of hydraulic rams.

The hard over to hard over time is much too fast at approximately 6 seconds. We would prefer a hardover time between 12-14 seconds.

The old autopilot control head from third party autopilot allowed us to adjust the speed of the autopilot.

Is there a way to reduce the speed of the new autopilot?

Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Autopilot Too Fast - flippercarson - 01-07-20 08:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication