European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Autopilots 
/
[CA] [CA11] Interfacing SmartPilot S3G course computer to Garmin gpsmap 4208
/
[CA] [CA11] Interfacing SmartPilot S3G course computer to Garmin gpsmap 4208
|
[CA] [CA11] Interfacing SmartPilot S3G course computer to Garmin gpsmap 4208
|
|
01-09-20, 01:32 PM
(This post was last modified: 01-09-20 01:32 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA11] Interfacing SmartPilot S3G course computer to Garmin gpsmap 4208
Welcome to the Raymarine Forum George,
Were this not involving a legacy Raymarine autopilot and a third party NMEA 2000 system, I might have suggested that a SeaTalk to SeaTalkng Converter Kit be used as part of the solution. However, the time proven solution would be to simply: - interface the 4800 BAUD NMEA 0183 output port of the third party chartplotter/MFD to the NMEA 0183 input port of either the autopilot's control head or course computer. If additionally desiring to have the heading and/or rudder angle data supplied to the third party chartplotter/MFD: - interface the 4800 BAUD NMEA 0183 input port of the third party chartplotter/MFD to the NMEA 0183 Port 1 OUT of the autopilot's course computer. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] Interfacing SmartPilot S3G course computer to Garmin gpsmap 4208 - GALLENHARMON - 01-09-20, 12:08 PM
RE: [CA11] Interfacing SmartPilot S3G course computer to Garmin gpsmap 4208 - Chuck - Raymarine - Moderator - 01-09-20 01:32 PM
|
User(s) browsing this thread: 1 Guest(s)