E125 Auto Pilot Controls do not work after upgrade to 15.59

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum LWhitty,

After failing to be able to duplicate the problem (i.e. it functioned correctly) our US Product Support office, our UK Product Support tested the system (ST-STng Converter (v2.01), e97 MFD (v15.61), S3 (v4.19) in their facility as well and were similarly unable to reproduce the reported problem. Video fo the test may be viewed here.

It is recommended that your MFD's waypoints, routes, and tracks be backed up, that the MFD be updated with v15.61 or later a/c/e/eS/gS-Series MFD software, that a System Settings & Data Reset be performed, and that the MFD's configuration settings then be manually reconfigured ... be certain to configure the Autopilot Controls to ON. Should the problem persist thereafter, then it is recommended that the S3 be sent to Raymarine's Product Repair Center to have its software updated to v4.19 ... the latest and final version tested by our UK Product Support Team.

The diagram below describes the system configured to perform testing within the UK. Should your system configuration differ, then please respond accordingly: