[CA] [CA11] UAV application with Axiom XL
|
01-13-20, 01:48 PM
Post: #4
|
|||
|
|||
RE: [CA11] UAV application with Axiom XL
Mig888,
As you have suggested, the Axiom XL MFDs do not feature an internal microSD memory card reader and are dependent upon one or more of the system's MFDs to have a Remote Card Reader attached to its USB port. In the case of your system, should it feature two Axiom XL MFDs, then the USB port of one Axiom MFD would be interfaced to a Remote Card Reader and the second MFD would be interfaced to the UAV's remote control. Should it turn out that the system was installed with two Remote Card Readers, then one of these would need to be unplugged to permit the UAV's remote control to be plugged into the MFD's USB socket. As indicated earlier, cartography is shared among the system's MFDs. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] UAV application with Axiom XL - Mig888 - 01-10-20, 02:53 PM
RE: [CA11] UAV application with Axiom XL - Chuck - Raymarine - Moderator - 01-10-20, 03:59 PM
RE: [CA11] UAV application with Axiom XL - Mig888 - 01-10-20, 09:38 PM
RE: [CA11] UAV application with Axiom XL - Chuck - Raymarine - Moderator - 01-13-20 01:48 PM
RE: [CA11] UAV application with Axiom XL - Mig888 - 01-13-20, 08:54 PM
RE: [CA11] UAV application with Axiom XL - Chuck - Raymarine - Moderator - 01-14-20, 09:42 AM
|
User(s) browsing this thread: 1 Guest(s)