Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Es 127

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Es 127
01-13-20, 01:59 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Es 127
Welcome to the Raymarine Forum Dwight,

If the MFD was behaving in a manner such that its Limitations of Use dialog was being displayed, then it would likely indicate a loose or corroded connection within the power or ground circuits to which the MFD has been connected. However should the Limitations of Use dialog not be displayed during the cycling which you have described, it would appear that the MFD may have suffered a failure within its touchscreen circuitry necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Es 127 - Dwightpierce07 - 01-10-20, 09:19 PM
RE: [CA11] Es 127 - Chuck - Raymarine - Moderator - 01-13-20 01:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication