Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] cable adapters
01-17-20, 09:49 AM (This post was last modified: 01-17-20 09:55 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] cable adapters
Johnny,

Deciding whether to purchase an Axiom Pro S MFD instead of an Axiom Pro RVX MFD will typically be based upon the depth of waters fished and/or the type of fishfinder sonar imaging desired. More information concerning the Axiom Pro MFDs may be found with Raymarine's Axiom Pro MFD web pages. Axiom Pro S MFDs and Axiom Pro RVX MFDs differ in the type of internal fishfinder circuitry which is built into the MFD. Axiom Pro S MFDs are constructed with internal low power / high frequency conical CHIRP sonar circuitry which will exclusively support processing sonar imagery from CPT-S transducer. The maximum depth supported by transducers supporting low power / high frequency conical CHIRP sonar are specified within the FAQ found here. In contrast, Axiom Pro RVX MFD are equipped with a pair of transducer sockets which in turn are interfaced to two set of fishfinder circuitry within the MFD. One of the Axiom Pro RVX MFD's transducer sockets is designed to be interfaced to a RealVision Transducer(s). When interfaced to such, the Axiom Pro RVX MFD will support RealVision, DownVision, SideVision, and low power / high frequency conical CHIRP sonar imaging. The Axiom Pro RVX MFD's second transducer socket is designed to be interface to a compatible high power (1kW, 2kW, or 3kW) CHIRP sonar transducer(s) to support deep water operation and enhanced imaging associated with higher power transducer. This same transducer socket of the Axiom Pro RVX MFD may alternatively be adapted to be mated to a compatible 50kHz / 200kHz fishfinder transducer such as the A66091 B744V Transducer indicated within my previous response.

As was suggested within my initial response, additional types of sonar imaging / performance may be added to any model of Axiom/Axiom Pro/Axiom XL MFD by interfacing the MFD to a compatible fishfinder sounder module (ex. RVX1000, CP100, CP200, CP370, CP470, CP570) supporting the desired type of sonar imaging / performance or compatible MFD having internal fishfinder circuitry (ex. Axiom DV MFD, Axiom RV MFD, Axiom Pro RVX MFD) supporting the desired type of sonar imaging / performance, which in turn has been interfaced to a compatible transducer(s).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] cable adapters - johnny - 01-14-20, 01:29 PM
RE: [CA11] cable adapters - johnny - 01-17-20, 08:57 AM
RE: [CA11] cable adapters - Chuck - Raymarine - Moderator - 01-17-20 09:49 AM
RE: [CA11] cable adapters - johnny - 01-21-20, 01:25 PM
RE: [CA11] cable adapters - johnny - 01-21-20, 02:21 PM
RE: [CA11] cable adapters - johnny - 01-21-20, 04:01 PM
RE: [CA11] cable adapters - johnny - 01-22-20, 08:38 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)