The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot
01-20-20, 11:41 AM (This post was last modified: 01-22-20 10:34 AM by Chuck - Raymarine - Moderator.)
Post: #1
CaptnFrank Offline
Junior Member
**
 		Posts: 10
Joined: Mar 2019
Reputation: 0
[CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot
I would like to interface my axiom 9 to three devices. First, and of highest priority, is an auxilary alarm buzzer, then to an ST40 bidata (speed-depth) and finally to my Raymarine tiller pilot. I want to be sure that these can all be connected to a Seatalkng backbone. I would also appreciate a list of parts necessary to get it up and running. Also can these be run in series from one 5-way connector?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - CaptnFrank - 01-20-20 11:41 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication