Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot
01-22-20, 10:35 AM (This post was last modified: 01-22-20 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot
Welcome to the Raymarine Forum Frank,

Please note that a powered and properly terminated SeaTalkng / NMEA 2000 backbone will need to be installed and that it will need to include a SeaTalk to SeaTalkng Converter as one of its backbone components. The referenced document and Raymarine's SeaTalkng / NMEA 2000 web page provide a list of Raymarine's SeaTalkng networking components. The MFD and SeaTalkNG Auxiliary Alarm Buzzer will each be interface to individual spur sockets within the backbone. The SeaTalk to SeaTalkng Converter will be used to support interfacing the ST40 Bidata and possibly the autopilot to the system. What model of tiller pilot do you own?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - Chuck - Raymarine - Moderator - 01-22-20 10:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication