[CA] [CA11] axiom 12 rv

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Marcot,

Please accept our apology for this late response to your question. Please note that it is not possible to operate a MFD running LightHouse 3 software (i.e. Axiom/Axiom Pro/Axiom XL MFDs) simultaneously within an existing Ethernet (SeaTalkhs / RayNet) network featuring E-Series Classic MFDs. While it may be possible to interface a a MFD running LightHouse 3 software to a powered and powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the system's Data Master E-Series Classic MFD (running v5.69 software) has also been interfaced as a spur, it will not be possible for cartography, radar, fishfinder features, or waypoint/route/track data to be shared via this interface. When interfaced via a common backbone, only GPS, instrument, navigational, and system state data will be shared between the system's MFDs. Please additionally note, that when so interfaced the system's Data Master E-Series Classic MFD would need to be disconnected from the SeaTalk bus. A SeaTalk to SeaTalkng Converter would need to be added to the aforementioned SeaTalkng backbone to support communications with the various st 60+ S3G smartpilot.