[TG] [TG11] Autorouting problems with Axiom Pro

[merlin956]

I got out on the water and tried to create another autoroute that I could follow. I made a video of the process but at 190Mb it seems that it is too big to attach.

Same problem. Even though I reduced the safe depth down to 1 ft in my settings it still told me it couldn't create a safe route and the Follow button was greyed out so I couldn't elect to follow it anyway.

I was in 10.8 ft of water when I created the route and the endpoint would have been more than 14 ft given the tide at the time. With a tide drop of 3.5 ft to low (at the time I created the route) that still made the minimum depths over 6 feet along the entire route at low tide. I have travelled this area extensively for nearly 50 years and there is nowhere that the water depth would have been anywhere near the minimum safe depth along the entire route.

The start point used was Australia, Moreton Bay Brisbane. Horseshoe Bay on Peel Island to near Cleveland point.
:
27⁰ 30.332’S 153⁰ 21.409’E
and the ending point was:
27⁰ 29.804’S 153⁰ 16.668’E