[CA11] smartpilot X10 no movement issues

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] smartpilot X10 no movement issues

01-26-20, 05:48 PM (This post was last modified: 01-27-20 05:29 PM by Chuck - Raymarine - Moderator.)

Post: #1

hydra larry Offline

Junior Member

Posts: 2
Joined: May 2018
Reputation: 0

[CA11] smartpilot X10 no movement issues

I have a smartpilot X10 autopilot with a P70 control head and seastar AP1219 hyd pump. when I engage the A/P and command it to move in one direction lets just say +10, I can see the outboards moving in that direction. I also can also hear the pump operating. However when I command it to go to the opposite direction I can hear the pump operating but no engine movement. Of course when I try to calibrate the system and gets to the part where it suppose to do a circle it will fail. Any ideas where to start?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] smartpilot X10 no movement issues - hydra larry - 01-26-20 05:48 PM

RE: [CA11] smartpilot X10 no movement issues - Chuck - Raymarine - Moderator - 01-28-20, 10:43 AM

RE: [CA11] smartpilot X10 no movement issues - hydra larry - 01-29-20, 07:31 AM

RE: [CA11] smartpilot X10 no movement issues - Chuck - Raymarine - Moderator - 01-29-20, 10:17 AM

User(s) browsing this thread: 4 Guest(s)