[CA] [CA11] Block diagram Oregon fishing boat with Axiom

[Chuck - Raymarine - Moderator]

lukerabun,

Q1. I updated the block diagram and I think I got it this time, fingers crossed.lol.
A1. Your most recent diagram appears correct ... great job!

Q2. It appears that the B175HW only comes in a 8 or 10 pin configuration. The B175M come in a 111 pin configuration. So I assume I will need a cable to adapt to the AP16's 11 pin configuration? If so what part number for that adapter?
A2. The Raymarine B175HW transducer features a short cable and is designed to be mated to either Raymarine's A102150 5m Extension Cable or A80327 10m Extension Cable. The extension cable, along with the cable from the B175M will be mated to the A102146 Y-Cable, which in turn will be connected to the Axiom Pro RVX MFD's 1kW Transducer socket. The leg of the Y-Cable labeled A will be connected to the transducer supporting the lower of the two frequency ranges supported by the two transducers ... in this case the B175M.