Raymarine forum / Raymarine Forums / AIS v / [LW] [LW11] AIS700 do not send position data to DSC VHF

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] AIS700 do not send position data to DSC VHF
01-31-20, 04:40 AM (This post was last modified: 02-14-20 09:47 AM by Louise - Raymarine - Moderator.)
Post: #5
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] AIS700 do not send position data to DSC VHF
Dear capmax1,

Let us start again, I did not have visibility of your images in the initial post.

In the configuration tab you do need the NMEA0183 sentences ticked to enable GPS data - GBS, GGA, GLL & RMC.

Please enable these to the correct NMEA in +/- on your Icom radio and connect the NMEA out on port 2 with speed of 4800 baud

AIS700 purple is NMEA out + to the ICOM yellow NMEA in +
AIS700 pink is NMEA out -to the ICOM green NMEA in -

Before disconnecting from the ProAIS2 software ensure that you have a good satellie fix in the GNSS tab. If all looks good connect the VHF to AIS and a GPS fix from the AIS700 should become available.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] AIS700 do not send position data to DSC VHF - Louise - Raymarine - Moderator - 01-31-20 04:40 AM

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication