Raymarine forum / Raymarine Forums / Autopilots v / S2/SHS Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
S2/SHS Problem
06-20-16, 04:01 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: S2/SHS Problem
Welcome to the Raymarine Forum danderer,

The reported symptoms are typically indicative of a failure of the gyro within a S1G, S2G, S3G autopilot course computer or SHS. Should the autopilot function properly within the SHS connected to your system, then this would fault isolate the problem to the SHS. As Raymarine can no longer service the SHS products, it is recommended that the SHS be permanently disconnected from your system, permitting the autopilot course computer to function as a S2 again. Unfortunately, Raymarine does not off any products designed to replace a SHS within a system such as yours.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
S2/SHS Problem - danderer - 06-19-16, 06:04 PM
RE: S2/SHS Problem - Chuck - Raymarine - Moderator - 06-20-16 04:01 PM
RE: S2/SHS Problem - danderer - 06-21-16, 03:02 PM
RE: S2/SHS Problem - danderer - 06-22-16, 12:40 PM
RE: S2/SHS Problem - danderer - 06-22-16, 01:08 PM
RE: S2/SHS Problem - danderer - 07-02-16, 02:07 PM
RE: S2/SHS Problem - danderer - 07-27-16, 11:22 AM
RE: S2/SHS Problem - danderer - 07-27-16, 01:14 PM
RE: S2/SHS Problem - danderer - 07-27-16, 01:53 PM
RE: S2/SHS Problem - danderer - 07-27-16, 02:45 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication