Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Using Element 7S to update system components

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using Element 7S to update system components
02-06-20, 02:26 PM (This post was last modified: 02-06-20 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Using Element 7S to update system components
Dave,

For the benefit of others who may be viewing this thread, please verify that you have followed the procedure specified within the FAQ found here for populating the SD memory card. From your screen snapshot of the Apple computer, it appears that the SD memory card was properly populated. Should the software update dialog not appear, you can also select Check SD card from the Update software pop-over options (Homescreen >
Settings > Getting started > Update software). Should the problem persist, then try re-formatting the SD memory card with a NTFS file system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Using Element 7S to update system components - Chuck - Raymarine - Moderator - 02-06-20 02:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication