[CA] [CA11] Type 100/300, EV1, STng

[Chuck - Raymarine - Moderator]

Olivier,

Q1. So if I understand well, I can positively get an Actisense device to connect my type 300 to my network, which then will be able to receive wind data to use the wind vane mode?
A1. As specified within the Type 100/300 Autopilot Course Computer's Owner's Manual, the Type 100/300 course computer is designed to receiver wind data via its NMEA 0183 communications interface and would therefore support any wind related features specified within the Type 100/300 Autopilot Course Computer's Owner's Manual when interfaced to a NMEA 0183 source of wind data ... such as that which would be provided by a NMEA 2000 to NMEA 0183 data bridging device.

Q2. with the P70s? I wanted to calibrate the autopilot, but the P70s won’t let me go further than the « Autopilot Calibration » page. I cannot sélect any of the three options (User Cal., Dealer Cal., Sea Trial)
A2. Please click here to view a FAQ addressing the list of autopilot course computers which are supported for use with the p70S/p70RS/p70/p70R autopilot control heads. Please note that the Type 100/300 autopilot course computers is not among the list of supported course computers and that this is quite possibly why you are experiencing issues accessing the options listed.