[LW] [LW11] AIS700 do not send position data to DSC VHF

[Louise - Raymarine - Moderator]

Dear capmax1,

Thank you for the post.

Your current AIS700 is currently on v1.05 according to the ProAIS2 software. The pink and purple are the lo NMEA out on the AIS700, this has been corrected.

There are no known issues for GPS out on NMEA lo from the AIS unit. Are you taking the reading directly from the cable or at a point in the circuit you have put together? Remove the cable and measure from just the bare ends.

Alternatively send the AIS unit back to us and get the unit tested in our service department. You can book this in here.

Many Thanks
Louise