[LW] [LW11] AIS700 do not send position data to DSC VHF

[capmax1]

Thanks for your answer Louise,

Yes I have measured the NMEA LO OUT signals directly from the cable ended with a connector. This connector, mounted by me, is NOT in short cirquit or open as I measured isolation to both cable side with NO AIS connected.
If you are confident the AIS SW revision is NOT the issue I will ask to the local office to show me an AIS700 able to send on NMEA LO OUT the expected signals.
Can I use your message to start the procedure to contact the local Raymarine office?

Appreciate your help and sorry for your time to manage this issue.
Cheers MAX