Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Axiom Pro RVX - High / Low chirp Transducers??

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro RVX - High / Low chirp Transducers??
02-18-20, 03:03 PM
Post: #15
DFMott Offline
Member
***
 		Posts: 60
Joined: Dec 2016
Reputation: 0
RE: [CA11] Axiom Pro RVX - High / Low chirp Transducers??
The system is on 3.11.42 - always was. A CP470 was not used during testing but one will be when the transducers are installed in the hull. The current B164 is connected via a CP370 and the axiom finds the bottom. Both the B164 and the CP370 will be removed. The over-the-side test was just to make sure the transducers were working prior to permanent installation.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro RVX - High / Low chirp Transducers?? - DFMott - 02-18-20 03:03 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication