[CA] [CA11] Axiom Pro S - Seatalk HS

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mike,

As I believe that you have inferred, the Axiom MFD must be interfaced to the system's Ethernet network switch. Please verify that LightHouse 3 v3.11.42 software has been installed on each of the system's MFDs (Axiom and eS-Series) and that a Power ON Reset Procedure has been performed on the Axiom Pro MFD. Should the problem persist and the switch's network LED not flicker, then it may be indicative of a problem with the MFD's Ethernet port ... try it's other Ethernet Network port (as a workaround). Should the above not address the problem, then it would be recommended that the MFD be returned for replacement or sent to Raymarine’s Product Repair Center to be bench checked / serviced.

It is additionally recommended that within such mixed systems that the Axiom Pro MFD be designated as the system's Data Master MFD and that it be used to pair with the Quantum radome.