[CA] [CA11] AR200 vs GA150

[Chuck - Raymarine - Moderator]

Mig888,

Should you indeed have a Raystar 150 GPS Sensor currently installed onboard, then the physical actions required to replace it with an AR200 would be to simply remove the mount's top, lift out the Raystar 150 GPS Sensor, unplug its spur cable from its spur socket, set the Raystar 150 GPS Sensor aside, plug the spur cable into the AR200's spur socket, place it into the Raystar 150 GPS Sensor's mount, ensuring that its indexing arrow is pointed to the boat's bow (parallel with the keel), re-install the mount's cover, and then follow the instructions within Chapter 15.9 AR200 Calibration (Linearization) of the LightHouse 3.11 Advanced Operation Instructions.