Depth Display erratic readings

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Depth Display erratic readings

06-21-16, 02:52 PM

Post: #3

Lastmango Offline

Junior Member

Posts: 2
Joined: Jun 2016
Reputation: 0

RE: Depth Display erratic readings

Hi Chuck,

The vessel is a sailboat. The transducer model is: P319 Standard plastic low profile thru-hull transducer (M78713-PZ) with 45 ft. cable. I haven't noticed any particular speed where it starts to occur. Max speed is only 6kts, so somewhere between 0 and 6. Problem occurs when engine is off too. I've updated everything to the latest firmware from the website.
Going to try and wire transducer direct to the i50 depth display this weekend.
Mike

« Next Oldest | Next Newest »

Messages In This Thread

Depth Display erratic readings - Lastmango - 06-16-16, 08:51 AM

RE: Depth Display erratic readings - Chuck - Raymarine - Moderator - 06-16-16, 10:17 AM

RE: Depth Display erratic readings - Lastmango - 06-21-16 02:52 PM

RE: Depth Display erratic readings - Chuck - Raymarine - Moderator - 06-22-16, 09:06 AM

RE: Depth Display erratic readings - C Sail - 06-27-16, 09:09 PM

RE: Depth Display erratic readings - Chuck - Raymarine - Moderator - 06-28-16, 09:43 AM

User(s) browsing this thread: 4 Guest(s)