The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] E55058 to hs5 question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E55058 to hs5 question
02-21-20, 05:36 PM (This post was last modified: 02-24-20 11:20 AM by Chuck - Raymarine - Moderator.)
Post: #1
Saltnbattery Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2020
Reputation: 0
[CA11] E55058 to hs5 question
I have recently replaced an e120 classic with both an es127 & es128. I bought the hs5 seatalk switch, and want to know if it is possible to connect the existing e55085 seatalk(w/ Ethernet connectors) to the hs5. I want to do this because all my existing raymarine components(DSM 300, radar, and sr100) are already hooked to the e55085 that was running to the e120 classic via Ethernet cables. If so, what cable do I need- and which port on the e55085 should I use? Currently I only have the 2 new e12 units connected to the hs5, but I plan to add a flir camera.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E55058 to hs5 question - Saltnbattery - 02-21-20 05:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication