The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] "No transducer connected."

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] "No transducer connected."
02-22-20, 02:26 PM (This post was last modified: 02-24-20 01:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
fidlerjim Offline
Junior Member
**
 		Posts: 7
Joined: Apr 2017
Reputation: 0
[CA11] "No transducer connected."
Am receiving message "No transducer connected." "Connect a transducer and restart the unit." Have disconnected/reconnected and checked cables. Get same result with xducer connected to either of two Axiom 9 RV MFDs. Settings\Network\Data Sources\ indicates "Searching for devices that provide Depth" and "Searching for devices that provide Speed through water" finds transducer, regardless of which MFD it is connected to. Worked properly since installation over a year ago. Just recently updated to 3.11.42. Xducer is B744V/A66091 with adapter cable. All networked software up to date except ACU400 at 2.23.
Any suggestions?
Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] "No transducer connected." - fidlerjim - 02-22-20 02:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication