Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ACU-200 can't power the Seatalk bus

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ACU-200 can't power the Seatalk bus
02-24-20, 04:05 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ACU-200 can't power the Seatalk bus
Welcome back to the Raymarine Forum Denis,

The About System diagnostic feature (MENU->SET-UP->DIAGNOSTICS->ABOUT SYSTEM) of the p70/p70S/p70R/p70RS autopilot control heads may be used to query the SeaTalkng backbone for other devices within the network. Should a device be listed by the About System feature, then communications between the device and the SeaTalkng / NMEA 2000 backbone has been verified. In the case of your system, the p70S, ACU-200, EV-1, and A70D should be listed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ACU-200 can't power the Seatalk bus - Chuck - Raymarine - Moderator - 02-24-20 04:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication