[CA] [CA11] Upgraded autopilot. No dockside wizard.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Bfb1115,

In order to run the Dockside Wizard, the Calibration Lock (MENU->SET-UP->VESSEL SETTINGS->CALIBRATION LOCK) will need to be configured OFF. Please additionally ensure that your Raymarine products have each been updated with the latest available Raymarine product software updates. When updating the autopilot software, the EV-1 CCU's software should be updated prior to updating the ACU's software. Please note that any update to an Evolution autopilot should be following by a Pilot Factory Reset (MENU->SET-UP->AUTOPILOT CALIBRATION->COMMISSIONING->PILOT FACTORY RESET; not to be confused with the autopilot control head's Factory Reset) and subsequent recommissioning of the autopilot. Please click here to view a FAQ addressing this subject.

The About System diagnostics feature of the autopilot control head should list all devices which have been interfaced to the backbone and have compatible software versions. E-Series Classic MFDs should be updated with v5.69 E-Series Classic MFD software.