The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Radar doesn't turn on
02-29-20, 02:25 PM (This post was last modified: 03-02-20 11:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Radar doesn't turn on
Hi, have two Axiom Pro 12's, and a Quantum radar radome. Had system installed by an installer before 2019 season and the system worked great, until August, when I tried to connect the radar, the Axiom would indicate it couldn't find the radar - if I cycle the Axioms and circuit breaker to the radar multiple times (sometimes as long as 15 - 20 minutes), it will ultimately find the radar and transmit - it's just finding the radar at start up that is the problem - after that it works great. I boat a lot in fog, so I'm concerned that the radar will not turn on at some point in the future when it is truly needed. I turn radar on every time I use the boat. Radar is connected via WiFi.

Is this a known problem? Is there a workaround, solution or upgrade that I can do to prevent this problem from reoccurring?

Thank you, Ed
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Radar doesn't turn on - eahearn - 02-29-20 02:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)