The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] RV 220

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RV 220
03-08-20, 07:13 PM (This post was last modified: 03-09-20 03:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
Never II Nauti Offline
Junior Member
**
 		Posts: 17
Joined: Dec 2019
Reputation: 0
[CA11] RV 220
Having some challenges locating an install site for my Rv220’s. It is okay to install one of the transducers under the generator that is placed above the stringers. I estimate that there might be 10-12” above the ducer. Also, with a 15 or 16 degree dead rise is it best to go with the 220’s or 212’s? The picture attached is the starboard side without the generator above. I would be installing to the right of the shaft shown. Seems good on this side but the other would be under the genie. Installing on a 42 Tiara that has pockets so it takes some areas away from me.

Likely will end up getting an authorized installer if no clear choice that you like.

Thanks for the help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RV 220 - Never II Nauti - 03-08-20 07:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication