[CA] [CA11] Only some AIS contacts displaying on Axiom 12

[Chuck - Raymarine - Moderator]

Paul,

Please note that we are unaware of any similar reports with other third party AIS products. It is recommended that you verify that the third party AIS has been updated with the latest available software from its manufacturer. If so and the problem persists, then it would appear that is an issue with either the NMEA 2000 PGNs being transmitted by the third party AIS product or with the processing of these PGNs by the MFD. Should the third party AIS product have been updated with the latest available software and should the problem persist, then it would be recommended that approximately 10 minutes of received NMEA 2000 be recorded (HOME->SETTINGS->NETWORK->DIAGNOSTICS->NMEA DEVICES & MESSAGES->NMEA MESSAGES; RAW DATA->ENABLE; START RECORDING) and that the resulting NMEA 2000 log file be attached to this thread for further analysis.