[CA] [CA11] 12” axiom pro and 9” axiom

[Chuck - Raymarine - Moderator]

Robert,

Q1. I am struggling to find the part number for a ray marine 50/200 skimmer. I only keep finding the one with the speed paddle in it.
A1. Should an Axiom 9 RV be installed on the bow, then it may be adapted (A80488 respectively) to accept an E66073 P74 Urethane In-Hull / Trolling Motor Transducer 600W.

Q2. I was going to order just the axiom 12” for the bow it will he incorporated into a minn Kota transducer I did find a cable for that.
A2. Please note that the bow MFD would then need to be an Axiom 12 RV MFD. The Minn Kota transducer adapter part number is A62363. This part number will be used in conjunction with the adapter specified in my response to Q1.

A3. Someone mentioned to be I should also do a nema cable ?
A3. This is not necessary. The bow MFD may be interfaced to the helm MFD in the manner specified within my initial response.