[CA] [CA11] Changing Engine Date parameters ES127
|
03-10-20, 03:13 PM
(This post was last modified: 03-10-20 03:35 PM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: [CA11] Changing Engine Date parameters ES127
BCI,
Was the vessel equipped with a digital switching system? If not, then engine red line and RPM range may be configured by: 1) opening the Data application 2) scrolling through the Data application's panels to view the Engine panel 3) command the Max RPM Range (MENU->DATA SET-UP->MAX RPM RANGE) to match that of the engines 4) command the RPM Red Zone (MENU->DATA SET-UP->RPM RED ZONE->MANUAL) to match that of the engine red zone |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Changing Engine Date parameters ES127 - BCI - 03-02-20, 09:44 AM
RE: [CA11] Changing Engine Date parameters ES127 - Chuck - Raymarine - Moderator - 03-05-20, 01:33 PM
RE: [CA11] Changing Engine Date parameters ES127 - BCI - 03-10-20, 02:30 PM
RE: [CA11] Changing Engine Date parameters ES127 - Chuck - Raymarine - Moderator - 03-10-20 03:13 PM
RE: [CA11] Changing Engine Date parameters ES127 - BCI - 03-10-20, 03:18 PM
RE: [CA11] Changing Engine Date parameters ES127 - Chuck - Raymarine - Moderator - 03-10-20, 03:54 PM
RE: [CA11] Changing Engine Date parameters ES127 - BCI - 03-10-20, 04:04 PM
RE: [CA11] Changing Engine Date parameters ES127 - Chuck - Raymarine - Moderator - 03-10-20, 04:11 PM
RE: [CA11] Changing Engine Date parameters ES127 - BCI - 03-10-20, 07:04 PM
RE: [CA11] Changing Engine Date parameters ES127 - Chuck - Raymarine - Moderator - 03-11-20, 08:04 AM
|
User(s) browsing this thread: 3 Guest(s)